3M™ PPS™ Series 2.0 Lids are designed for the next generation 3M™ PPS™ Series 2.0 Spray Cup System. A ¼-turn locking system replaces our traditional PPS collar, letting you attach the lid to the hard cup with a quick twist. A domed design allows up to 3 oz of fluid below the filter, reducing inconsistent spray and sputter. Full-diameter filters and a wider fluid spout improve flow and filtration.

3M™ PPS™ Series 2.0 Lids are designed for the next generation 3M™ PPS™ Series 2.0 Spray Cup System. A ¼-turn locking system replaces a separate collar, letting you attach the lid to the hard cup with a quick twist. A domed design allows up to 90 ml (3 oz) of fluid below the filter, reducing inconsistent spray and sputter. Full-diameter filters and a wider fluid spout improve flow and filtration. Use 3M™ PPS™ Series 2.0 Lids wtih the 3M™ PPS™ Series 2.0 Spray Cup System Kit for efficient paint, primer or coating spray applications. PPS™ Series 2.0 Lids lock onto cups with a quarter-turn, without the need for a separate collar. 3M™ PPS™ Series 2.0 Lids are integral to delivering added benefits in paint application and shop efficiency. Each lid features a domed geometry that allows up to 90 ml (3 oz) of material to be held below the filter during on-demand spraying. 3M™ PPS™ Series 2.0 Lids also feature a wider fluid spout for improved flow, and the built-in 125 or 200 micron filter extends the full diameter of the lid for the highest quality filtration and consistency from start to finish. Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.  The 3M™ PPS™ Series 2.0 Spray Cup System offers a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.