• Product Spec Sheet https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_1479248326721.pdf
  • Product Spec Sheet https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_1520563385097.pdf

Milwaukee® 4270-21 Compact Portable Electromagnetic Drill Press, 1/2 in Chuck, 1-1/8 hp, 2 in Drill to Center From Base, 450 rpm Spindle, 120 VAC

  • ITEM CODE: MILWA-427021
  • UPC: 045242013180

  • Min. Order Qty: 1
  • Qty. Interval: 1


Milwaukee® 4270-21


Power and precision in a lightweight, portable drill press with the biggest capacity in its class. At just 26.5 pounds, with a comfortable carrying handle that's well positioned for balance, this compact drill press is ideal for remote drilling in metal. It handles your toughest drilling applications with a powerful 1.1 maximum horsepower, 9 A motor: up to 1-1/2 in Dia holes through 2 in THK steel with annular cutters or 1/2 in Dia holes 4-1/4 in deep with twist drill bits. The strong two-coil magnet provides 2300 lb of dead-lift force on 1 in thick steel. Two hex cutter wrenches are stored on-board for added portability. This drill accepts standard 3/4 in Weldon shank cutters or an optional 3-jaw chuck (sold separately) for use with twist drill bits. The simple two-button control panel is located on the back, where it will not interfere with the feed handle. That handle can be conveniently relocated to the opposite side without using tools.

Milwaukee® Electromagnetic Drill Press, Compact Portable, 1/2 in Chuck, 3/4 in Weld-On Spindle Taper, 6.6 in Spindle Travel, 450 rpm Spindle Speed, 1 Spindle Speed, 750 lb Drill Point Pressure, 2 in Drill to Center From Base, 15-1/4 in Overall Height, 1-1/8 hp, 120 VAC, 9 A, 9-1/4 in L

Type : Compact Portable
Dimensions : 9-1/4 in L
Amperage Rating : 9 A
Overall Height : 15-1/4 in
Voltage Rating : 120 VAC
Horsepower : 1-1/8 hp
Spindle Taper : 3/4 in Weld-On
Drill Point Pressure : 750 lb
Spindle Travel : 6.6 in
Number of Spindle Speeds : 1
Drill to Center From Base : 2 in
Spindle Speed : 450 rpm
Chuck Size : 1/2 in
  • Maneuvers easily and conveniently
  • Lightweight design with a comfortable carrying handle
  • Superior capacity, cuts up to 1-1/2 in dia holes through 2 in steel with annular cutters or 1/2 in dia holes, 4-1/4 in deep with twist drill bits
  • Strong 2-coil magnet, engineered to stay in place with 2300 of dead lift force
  • Flexible feed handle, switch between two feed handle positions without using tools
  • Accessible and comfortable operation, simple 2-button control panel, unobstructed by feed handle
  • 8 ft fixed cord
  • 1/2 in drill capacity
  • 1-1/2 in capacity steel
  • Weld-on shank cutters or an optional 3-jaw chuck for use with twist drill bits
  • 1 in tap size capacity
  • Grounded construction
  • ARRA Compliant
  • Buy American Act Compliant
  • ETL/UL Listed
  • CSA Certified