• SDS https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/3M_021200_19811_SDS.pdf
  • Specification Sheet https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/3M_021200_19811_Specification_Sheet.pdf
  • Catalog https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/3M_621099_26311_Catalog.pdf

3M™ 021200-19813 1099 High Performance Medium Viscosity Plastic Adhesive, 1 gal Can, Liquid Form, White/Pink to Light Tan, 0.89

  • ITEM CODE: 3MIND-02120019813
  • UPC: 021200198137

  • Min. Order Qty: 1
  • Qty. Interval: 1


3M™ 021200-19813


3M™ nitrile high performance plastic adhesive 1099 dries quickly with an open time of approximately 40 min. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long term adhesion as well as good resistance to plasticizer migration. Our 3M™ nitrile high performance plastic adhesive 1099 bonds to a variety of substrates - primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather - as well as plastics, for a strong, enduring bond. However, it may stain thin or light colored vinyl's. With 3M™ nitrile high performance plastic adhesive 1099 you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications. Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch and then proceed with the application of the additional coat.

3M™ Plastic Adhesive, High Performance Medium Viscosity, Can, 1 gal, 7.3 to 7.5 lb/gal Net Weight, Nitrile Rubber Base, Composition: Acetone, Acrylonitrile Butadiene Polymer, Phenolic Resin Phenolic Polymer, Salicylic Acid, Zinc Oxide, Phenol, O-Cresol, Liquid, 456 sq-ft/gal Coverage, 40 min Setting Time, White/Pink to Light Tan, Ketone, 60 to 80 deg F, 0.89 Specific Gravity, -4 deg F Flash,


General Industrial and Signage Application

Type : High Performance Medium Viscosity
Work Life : 40 min
Composition : Acetone, Acrylonitrile Butadiene Polymer, Phenolic Resin Phenolic Polymer, Salicylic Acid, Zinc Oxide, Phenol, O-Cresol
Coverage : 456 sq-ft/gal
Base Type : Nitrile Rubber
VOC Content :
Container Size : 1 gal
Container Type : Can
Color : White/Pink to Light Tan
Bonds To : Fabric, Felt, Ceramic, Cork, Fibrous Glass, Flexible Latex, Flexible/Rigid Urethane, Glass, Leather, Metal, Paper and Cardboard, ABS, PVC, Acrylic, Flexible Vinyl, High Performance Nylon, Rubber, Wood, Hardboard
  • Fast drying and heat curable
  • Resists weathering, water, oil, plasticizer migration and alphalitic fuels
  • Provides strong, flexible bonds
  • Bonds vinyl extrusions and sheeting
  • For most brush or flow applications
  • Optional heat cure increases bond strength
  • Sprayable with industrial grade spray equipment
  • OSHA 29 CFR 1910.1200
  • pdf SDS https://assets.unilogcorp.com/2/ITEM/DOC/3M_021200_19811_SDS.pdf
  • pdf Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/3M_021200_19811_Specification_Sheet.pdf
  • pdf Catalog https://assets.unilogcorp.com/2/ITEM/DOC/3M_621099_26311_Catalog.pdf