• Product Spec Sheet https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Campbell_T7105304_Catalog.pdf

Campbell® 7100109 Eye Nut, Imperial, 1 in, Drop Forged Carbon Steel, Galvanized, 10000 lb Working

  • ITEM CODE: CAMPB-7100109
  • UPC: 020418100482

  • Min. Order Qty: 1
  • Qty. Interval: 1

loading

Campbell® 7100109

DESCRIPTION


Campbell® Eye Nut, Measurement System: Imperial, 1 in, Drop Forged Carbon Steel, Galvanized, Working Load: 10000 lb, 2-1/4 in Eye ID, 4 in Eye OD, 1-1/4 in Thread Length, 5-3/16 in Overall Height, Material Grade: 776-G/ASTM A153, UNC 2B

Material : Drop Forged Carbon Steel
Finish : Galvanized
Overall Height : 5-3/16 in
Thread Length : 1-1/4 in
Thread Type : UNC 2B
Material Grade : 776-G/ASTM A153
Working Load : 10000 lb
Diameter - Thread Size : 1 in
Eye Inside Diameter : 2-1/4 in
Measurement System : Imperial
Eye Outside Diameter : 4 in
  • Drop forged carbon steel normalized
  • 5:1 design factor
  • DO NOT EXCEED THE WORKING LOAD LIMIT
  • The standard WLL's are established for a vertical in-line pull
  • Make sure eye nuts are properly seated by screwing them down completely
  • Make sure the threads in the hole are clean and undamaged
  • Loads must always be applied parallel to the plane of the eye and never across the plane
  • Always stand clear of the load and lift the load with a steady, even pull
  • #7 size
  • pdf Catalog https://assets.unilogcorp.com/2/ITEM/DOC/Campbell_T7105304_Catalog.pdf