• Product Spec Sheet https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Campbell_7100102_Catalog.pdf
  • Product Spec Sheet https://www.mallory.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Campbell_7100102_Specification_Sheet.pdf

Campbell® 7100103 Eye Nut, Imperial, 3/8 in, Drop Forged Carbon Steel, Galvanized, 1250 lb Working

  • ITEM CODE: CAMPB-7100103
  • UPC: 020418100420

  • Min. Order Qty: 1
  • Qty. Interval: 1

loading

Campbell® 7100103

DESCRIPTION


Campbell® Eye Nut, Measurement System: Imperial, 3/8 in, Drop Forged Carbon Steel, Galvanized, Working Load: 1250 lb, 1 in Eye ID, 1-5/8 in Eye OD, 15/32 in Thread Length, 2-3/64 in Overall Height, Material Grade: 776-G/ASTM A153, UNC 2B

Material : Drop Forged Carbon Steel
Finish : Galvanized
Overall Height : 2-3/64 in
Thread Length : 15/32 in
Thread Type : UNC 2B
Material Grade : 776-G/ASTM A153
Working Load : 1250 lb
Diameter - Thread Size : 3/8 in
Eye Inside Diameter : 1 in
Measurement System : Imperial
Eye Outside Diameter : 1-5/8 in
  • Drop forged carbon steel normalized
  • 5:1 design factor
  • DO NOT EXCEED THE WORKING LOAD LIMIT
  • The standard WLL's are established for a vertical in-line pull
  • Make sure eye nuts are properly seated by screwing them down completely
  • Make sure the threads in the hole are clean and undamaged
  • Loads must always be applied parallel to the plane of the eye and never across the plane
  • Always stand clear of the load and lift the load with a steady, even pull
  • #2 size
  • pdf Catalog https://assets.unilogcorp.com/2/ITEM/DOC/Campbell_7100102_Catalog.pdf
  • pdf Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/Campbell_7100102_Specification_Sheet.pdf