Tungsten, Silver and Copper Alloys, UK

Trade Name:	Elkanite 100M

Hazardous Ingredients:	Base Metal - Molybdenum

Physical Properties:	Formula:	Mo
	Melting Point:	2610 deg C
	Boiling Point:	4639 deg C
	Vapour Pressure:	Not volatile
	Evaporation Rate:	Not volatile
	Solubility in Water:	Insoluble
	Density:	10.2g/cm³
	Appearance:	Silver or grey metallic
	Odour:	None

Fire & Explosion Hazards:	Flashpoint:	Not applicable
	Extinguishing media:	Dry powder, sand or powdered limestone


	Molybdenum powder and / or grinding dust constitute a weak fire and explosion hazard depending on the particle size and degree of dispersion in air.

Health Hazards General:	References available at the present time do not report any ill-health effects as a result of exposure to molybdenum. If a person breathes in a large amount of dust, remove from exposure. If material gets into the eyes, flush out particles with water and consult a doctor or hospital. On heating above 600 deg C. molybdenum trioxide vaporises but the vapour is non-toxic and is a nuisance rather than a health hazard.
Spill or Leakage Procedure:	Solid material presents no health hazards, but powder should be swept up carefully to avoid too much disturbance of the dust. Personnel involved with the clean-up operation should be provided with suitable respirators for dusty conditions. Waste material should then be disposed of according to local regulations.

Special Procedures and Precautions during Metal Working	Grinding	Use respirators to avoid breathing dust
	Ventilation:	Suitable local ventilation.
	Eye Protection:	Safety glasses.
	Gloves:	Not necessary for safe handling of heavy section but advised for thin sheet to avoid cuts from sheet edges